Copper coils
Pancake copper coils
Soft-drawn coils in 3/16" to 7/8" OD for refrigerant lines.
Matched byPipe OD, wall thickness and length
Check fit & price
Enquire
AC & HVAC spare parts · Hyderabad
Parts that keep cooling going.
The wrong part can cost more than the repair. Browse common AC spares below and let our team match the exact part to your unit. Just share the make, model and a photo of the old part if you have one.
Find a part
Browse by category.
Open a category to see the parts we supply. Availability and fit depend on your AC model, so enquire and we'll check compatibility and stock.
Copper coils
Refrigerant tubing for split AC installations and repairs.
4 parts
Soft-drawn copper tubing in pancake coils carries refrigerant between the indoor and outdoor units. The right diameter and wall thickness protect against leaks and pressure loss, especially with high-pressure refrigerants like R32 and R410A.
Time to replace when
- New installation or AC relocation
- Oil stains or frost on pipe joints
- Repeated gas loss after refills
Copper coils
Liquid & suction line pairs
Matched pipe pairs for split AC indoor–outdoor connections.
Matched byPipe OD, wall thickness and length
Check fit & price
Enquire
Copper coils
Insulation sleeves & tape
Nitrile insulation and wrapping tape to stop sweating and heat gain.
Matched byPipe OD, wall thickness and length
Check fit & price
Enquire
Copper coils
Flare nuts & brazing consumables
Flare nuts, brazing rods and flux for leak-free joints.
Matched byPipe OD, wall thickness and length
Check fit & price
Enquire
Compressors
Replacement options matched to unit make and capacity.
4 parts
The compressor is the heart of every AC: it pressurises refrigerant and drives the cooling cycle. We help match rotary, reciprocating and scroll compressors to your unit's capacity, refrigerant and electrical supply so the replacement runs reliably.
Time to replace when
- Outdoor unit hums but does not start
- Breaker trips when the AC switches on
- Fan runs but air stays warm
Compressors
Rotary compressors
For split and window ACs, typically up to about 2 TR.
Matched byCapacity, refrigerant and power supply
Check fit & price
Enquire
Compressors
Reciprocating compressors
For older and some commercial units.
Matched byCapacity, refrigerant and power supply
Check fit & price
Enquire
Compressors
Scroll compressors
For higher-tonnage ductable, package and commercial systems.
Matched byCapacity, refrigerant and power supply
Check fit & price
Enquire
Compressors
Inverter (BLDC) compressors
Variable-speed compressors for inverter split ACs.
Matched byCapacity, refrigerant and power supply
Check fit & price
Enquire
Capacitors
Starting and running components with the right rating.
4 parts
Capacitors give compressors and fan motors the extra push they need to start and stay running. They are one of the most common failure points in hot weather, and a correctly rated replacement (µF and voltage) is often a quick, low-cost fix.
Time to replace when
- Clicking sound but no start
- Fan spins slowly or needs a push
- Swollen or leaking capacitor body
Capacitors
Compressor run capacitors
Keep the compressor running efficiently once started.
Matched byµF rating and voltage
Check fit & price
Enquire
Capacitors
Fan motor capacitors
For indoor blower and outdoor condenser fan motors.
Matched byµF rating and voltage
Check fit & price
Enquire
Capacitors
Dual-run capacitors
One unit serving both compressor and fan.
Matched byµF rating and voltage
Check fit & price
Enquire
Capacitors
Start capacitors & relays
Extra starting torque for hard-starting compressors.
Matched byµF rating and voltage
Check fit & price
Enquire
Fan motors
Indoor and outdoor unit motor replacements.
4 parts
Indoor blower motors move air across the cooling coil, and outdoor fan motors carry heat away from the condenser. A weak or noisy motor reduces cooling and strains the compressor. We supply motors matched by shaft size, rotation, RPM and mounting.
Time to replace when
- Grinding or rattling noise
- Weak airflow from the indoor unit
- Outdoor fan not spinning while the AC runs
Fan motors
Indoor blower motors
Cross-flow blower motors for wall-mounted indoor units.
Matched byShaft size, rotation, RPM and mounting
Check fit & price
Enquire
Fan motors
Outdoor condenser fan motors
Motors that carry heat away from the outdoor coil.
Matched byShaft size, rotation, RPM and mounting
Check fit & price
Enquire
Fan motors
BLDC / DC inverter fan motors
Variable-speed motors for inverter ACs.
Matched byShaft size, rotation, RPM and mounting
Check fit & price
Enquire
Fan motors
Fan blades & blower wheels
Replacement blades and cross-flow wheels.
Matched byShaft size, rotation, RPM and mounting
Check fit & price
Enquire
PCBs & controls
Control boards and electronic parts for AC units.
4 parts
Modern ACs depend on control boards to manage sensors, timers, inverter drives and safety cut-outs. Voltage fluctuations and moisture are common causes of failure. We help source model-specific PCBs as well as sensors and display boards.
Time to replace when
- Error code or blinking lights on the display
- Unit does not respond to the remote
- AC switches off at random
PCBs & controls
Indoor & outdoor unit PCBs
Main control boards for indoor and outdoor units.
Matched byBrand, model number and board part code
Check fit & price
Enquire
PCBs & controls
Inverter drive boards
Compressor drive boards for inverter ACs.
Matched byBrand, model number and board part code
Check fit & price
Enquire
PCBs & controls
Temperature & coil sensors
Room, coil and discharge thermistors.
Matched byBrand, model number and board part code
Check fit & price
Enquire
PCBs & controls
Display panels & receivers
Display boards and remote signal receivers.
Matched byBrand, model number and board part code
Check fit & price
Enquire
Filters & remotes
Everyday replacement and maintenance essentials.
4 parts
Clean filters keep airflow strong, protect the cooling coil and improve indoor air. A working remote keeps everyday control simple. These small parts make a noticeable difference to comfort and running cost.
Time to replace when
- Torn or clogged filter mesh
- Dusty or musty smell from the vents
- Lost, damaged or unresponsive remote
Filters & remotes
Mesh & dust filters
Washable air filters for indoor units.
Matched byBrand and model number
Check fit & price
Enquire
Filters & remotes
Carbon & anti-bacterial filters
Extra filtration for odours and cleaner air.
Matched byBrand and model number
Check fit & price
Enquire
Filters & remotes
Original & universal remotes
Brand-original or compatible universal remotes.
Matched byBrand and model number
Check fit & price
Enquire
Filters & remotes
Drain pipes & small fittings
Drain hoses, clamps and small installation fittings.
Matched byBrand and model number
Check fit & price
Enquire
Product photo goes here
Add an authorized coil image to static/images/
Photo placeholder · Split AC copper coil
Featured part · Copper coils
Copper pancake coil tubing
Flexible copper refrigerant tubing supplied in a flat coil for split AC pipe connections, installations, and repairs. It runs between the indoor and outdoor units as part of the refrigerant line set.
Check compatibilityTube diameter, wall thickness, length, insulation, and fit vary by AC model and installation. Share your unit make/model and required length so we can check the right option.
- Used for split AC refrigerant pipe connections
- Coil lengths from 15-100 m
- Share your AC make and model for a fit check
Mexflow coil size guide
Split AC copper coil| Nominal OD | OD (mm) | Min. wall |
|---|---|---|
| 3/16 in | 4.76 | 0.508 mm (0.020 in) |
| 1/4 in | 6.35 | 0.508 mm (0.020 in) |
| 5/16 in | 7.94 | 0.508 mm (0.020 in) |
| 3/8 in | 9.52 | 0.508 mm (0.020 in) |
| 1/2 in | 12.70 | 0.508 mm (0.020 in) |
| 5/8 in | 15.88 | 0.508 mm (0.020 in) |
| 3/4 in | 19.05 | 0.508 mm (0.020 in) |
| 7/8 in | 22.22 | 0.508 mm (0.020 in) |
Mexflow publishes an OD range of 4.76–22.22 mm, a 0.508 mm minimum wall thickness, and 15–100 m coil lengths. Exact size and thickness availability varies, so confirm against your AC model. View Mexflow specification.
Getting the right fit
Three details help us match your part fast.
You don't need to know the part number. These details are usually enough for us to identify it.
- 1
Brand & model
Check the sticker on the side of the indoor or outdoor unit for the model number and capacity.
- 2
Photo of the old part
A clear photo of the part and any labels or ratings printed on it (µF, voltage, HP, part code).
- 3
What went wrong
Describe the symptom. It helps us confirm the part is really the cause before you buy.
Not sure which part?
We can help identify it.
Send us the details and we'll confirm compatibility and availability.
